CERAN Hot Plates
Ceran - an unusual glass ceramic material - is highly resistant to breakage and temperature changes,
free from distortion, permeable to ultra-violet light and highly
acid-resistant.
Construction: The low mass Ceran plate is electrically heated over
its full surface and is bedded into a stainless steel frame which is
mounted on an internally insulated stainless steel housing.
The temperature control system consists of an electronic regulator,
activated by a NiCr-Ni temperature sensor (adjustable 50 ... 500°C)
installed in a Aluminium pressure cast housing. Warm-up time e.g.
500°C in 8 minutes. Four feet which can be individually adjusted to
an approx. height of 8 mm to ensure horizontal stability. In types
RC, the electrical connection between the control box and the hot
plate is protected by a flexible hose.
| Series C with Built-In Control Box |
 |
| Type | Watt | Volt | LxHxW | Ceran mm | Weight |
| 4C | 1500 | 230V 50-60 Hz | 440x100x300 cm | 430 x 140 cm | 5,0 kg |
| 11C | 2000 | 230V 50-60 Hz | 290x100x290 cm | 280 x 280 cm | 5,5 kg |
| Series RC with Separate Control Box |
 |
| Type | Watt | Volt | LxHxW | Ceran mm | Weight |
| 4RC | 1500 | 230V 50-60 Hz | 440x100x300 cm | 430 x 140 cm | 5,0 kg |
| 11RC | 2000 | 230V 50-60 Hz | 290x100x290 cm | 280 x 280 cm | 5,5 kg |